FL-608

Type:Anodizing Sealant
Model:FL-608
Property:
• The product is used in the process of anodizing aluminum alloy .                               
• It is composed of nickel metal salt, complexing agent, ash suppressant, buffer agent, dispersant, surfactant, etc.   
•It is especially suitable for high quality anodizing process of aluminum alloy. Non-fading. Can provide aluminum surface hardness. High thermal and light resistance.    
• Low consumption and easy to control.    
• Abide by Europe Union ROSH restrction.
Appearance:Light Green Powder, acetic acid irritating odor
Storage condition:The dye should be sealed up and stored in a dry place.
 
Working condition: Concentration 5g/l
PH 5.3-5.8
Temperature 75-95
Time 1-10min
Water quality City water (Pure water is recommended)

Bath make-up:
• The product should be dissolved thoroughly before working.
•  Dissolve the sealant fully (over 50℃) in an isolated container before pouring into the working fluid.  Then Stir the working fluid so that it is fully mixed and dissolved.
Analytical testing:
• Add 10 ml of 10% triethanolamine solution.
• Add a small amount of ammonium urate indicator (1-2 g).
• Titrate with 0.01 M EDTA to yellow to purplish red.
 •  Calculation: FL-608( g/l)= titrated ml ×0.331
light resistance:Outstanding.
Color fastness to heat:Outstanding. 
Explanation:Continuous filtration is necessary during the process of using
effluent disposal:It is explained in details in the Material safety information. Please contact us for enquiry if necessary.